Welcome Guest [Log In] [Register]
Welcome to Shaiya Beginning. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.


Join our community!


If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
hollowing and other defects
Topic Started: May 8 2017, 09:21 PM (63 Views)
happywork


<p>Regulations, and should be bonded firmly, tight, seams sealed, no damage, hollowing and other defects. Polyurethane coating waterproof layer, should be brushing evenly, protective layer and waterproof layer bonded firmly, no damage, uneven thickness and other defects. Finished product protection has been painted a good polyurethane coating waterproof layer, should take how make recycled plastic wood timely protection measures, do not do a good job before the protective layer, not wearing a spike out into the room, so as not to damage the waterproof layer.<p></p> Highlight the ground pipe root, floor drain, drain, sanitary ware, etc. at the surrounding waterproof layer shall not be damaged, parts shall not be displaced. Floor drain, drain, etc. should be kept open, the construction to prevent debris fell into the water should be carefully cleaned. Polyurethane coating waterproof layer construction process, not cured before the move can not walk, so as not to damage plastic flooring looks like wood in saudia the waterproof layer, causing leakage of hidden dangers. Polyurethane coating waterproof layer construction process, should pay attention to the protection of the door, wall and other parts, to prevent pollution of finished products.<p></p> Should pay attention to the quality of the problem hollowing: waterproof layer of hollow generally occurs in the leveling layer and the coating between the waterproof layer and seams, because the grass is too large, so that the film hollowing, the formation of bubbles. Construction should control the moisture content, and careful operation. Leakage: waterproof layer of water leakage, occurred in the pipe through the root of the root, floor drain, sanitary ware and yin and yang angle and other parts, because the root, floor drain and weathered wood composite other parts loose, bonding is not strong, brushing is not tight or waterproof Layer of local damage, parts of the closure of the closure of the length of the joints caused by insufficient. In the coating waterproof layer before construction, should be carefully checked and repaired.<p>
Offline Profile Quote Post Goto Top
 
« Previous Topic · Class Discussions · Next Topic »
Add Reply