Welcome Guest [Log In] [Register]
Welcome to Shaiya Beginning. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.


Join our community!


If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
Stainless steel cold - formed steel forming method
Topic Started: Jun 19 2017, 11:32 PM (53 Views)
happywork


Stamping molding The technology uses punch and die to produce the desired product shape, the domestic stainless steel stamping production is common in the production of stainless steel kitchen utensils, stainless steel pot, basin need deep stamping, kitchen handle handle also need to stamping bending, shoot flat.good quality sus 409 stainless steel coil Punch can be mechanical transmission, it can be hydraulic transmission, but the deepest when the best hydraulic transmission, because the full length of the stroke on the hydraulic press can provide full load pressure. Most of the traditional technology can be used for stamping molding of stainless steel, but because the required strength of stamping stainless steel than the power required to punch low carbon steel more than 60%, so the punch frame should be able to withstand such a large impact force.304 316 stainless steel price per kg Moreover, to solve the problem of scratches is also critical, especially when the high friction when the stainless steel and high temperature caused by the workpiece surface scratches. Commonly used soap or emulsion effect is not good, should use a dedicated stamping lubricants or lubricants containing special high-pressure additives, but because of this special high-pressure additives will cause corrosion of stainless steel surface, so after punching the workpiece should be removed The surface of the oil traces. As the stamping die processing costs are high, only in the mass production when the use of stamping molding technology.2014 T6 ���ݧ�ާڧߧڧ֧ӧ�� ���ԧ�ݧ�ߧڧ� �� ������ܧڧ� ���ѧ�֧��ӧ��
Offline Profile Quote Post Goto Top
 
« Previous Topic · Class Discussions · Next Topic »
Add Reply